To configure your View monitor's display, there are two ways to complete this action via the Airthings app or the web dashboard.
You can select up to 2 options to show on the screen from the following depending on which View monitor you have:
Radon
PM
Temperature
Humidity
VOCs
CO2
Air pressure
Outdoor temperature
If you want to change what's displayed on your View, you can do this at any time from the app or dashboard ✅
How to change the display of your View
Step 1 | Select Settings
On the home screen of the Airthings app in the bottom right corner, select the Settings tab.
Step 2 | Select Devices
Under 'Your Airthings System' please select Devices which house your device settings.
Step 3 | Select your View monitor
Step 4 | Select Display
The current items displayed currently on your View monitor will be shown here.
Step 5 | Personalize your monitor's display
Select up to 2 insights to show on the screen. When you wave in front of your device, the personalized insights will show for your viewing convenience.
After personalizing, select Save to make your desired changes to your monitor.
NOTE: When you have changed the configuration of the screen, it can take up to 10 minutes for the View monitor display to reflect the changes if using the Android app. If using iOS, the changes should occur after 1 minute on the display.
Web Dashboard
You can also change your View's display settings in the web dashboard: https://dashboard.airthings.com/devices
Step 1 | Select your View monitor from the Devices list
Step 2 | Select Settings on the top part of the website and choose Display
A drop-down menu will appear here.
In a drop-down menu select the values you want to be shown on your View monitor and press Save changes.
NOTE! After your screen preferences have been set up, it will take up to 10 minutes for the monitor to update.