If you have a Wave or Wave Plus, you can access your data through our Airthings App or the online Dashboard!
Graphs in the App
1. The Overview Section
In the App home screen, you can see all the elements measured by your Wave/Wave Plus and your overall air quality indicator. This is an overview of your most recent data. The "home screen" of a Wave is used in the example below:
Radon: is measured hourly, and accumulates to give you a 24hr rolling average.
In this example, it means 163bq/m3 was the average level of radon in the last 24 hours.
Humidity: measured every 5 minutes. 52% humidity is the most recent level measured in the last 5 minutes.
- Temperature: measured every 5 minutes. 21 degrees Celsius is the most recent measurement in the last 5 minutes.
For a Wave Plus:
Air pressure, CO2 and TVOCs are are also measured like humidity and temperature, and are updated every 5 minutes.
2. More Detail
If you choose any one of radon, temperature, or humidity, you will be brought to another screen which has more detail. Using radon as an example, the data points are plotted on a graph and shows your averages over certain periods of time:
- 48 Hours
- 1 Week
- 1 Month
- 1 Year
In the example below, the average level of radon is 70 bq/m3 for the last year:
Therefore, the example used in this article displayed:
162 bq/m3 is the average level of radon in the last 24hrs
70 bq/m3 is the average for the last year
You could then also explore your averages over the last 48hrs, week, or month. If you had consistently high readings for over 1 month, we would recommend contacting a radon professional, and that is why it is so important to be able to visualise your data.
Graphs in the online Dashboard
1. Dashboard Overview
The Dashboard overview offers you customizable tiles for whichever air quality aspect you want to focus on most:
2. More Detail
To go into more detail, select one of the tiles, or go to the "devices" section. Here you can see the details of measurements taken in each location, and also change the views to show you data collected over specific periods of time.
In the example below, you can see a detailed view of data collected by a Wave over the last month.
About the graphs and algorithms:
The algorithm in the app interprets the raw radon data and builds a plot by smoothing out the noise and other fine-scale / rapid phenomena.
This is a trade-off, of course: the choice is between an accurate but less readable display of spikes and a smoother and more readable plot, at the expense of greater accuracy.
It is more important to look at patterns and behaviour over a longer period of time. For example, a single spike in radon would not warrant installing a mitigation system - what really matters are your long term averages.