View series monitors contain up to 7 sensors and they each have their own sampling rates. However, we have added a few options to the sensor sampling rates and cloud upload functionality in order to give the option of extending battery life.

Regardless of the setup, the following sensors take physical samples every 2.5 minutes:

and these sensors take samples every 5 minutes:

While radon is always sampled hourly (as part of the rolling 24-hour average).

This sensor data will always be up-to-date locally on the display of View Plus.

However, the options you have with View Plus affect the sampling rate of the PM sensor, and how often all sensor data is uploaded to the cloud.

When battery-operated, there are two options for how often the PM sensor takes samples of the air:

You can configure these settings by following the directions here. This will also affect how often all other sensor data becomes visible in the app and dashboard.

The PM sensor will automatically take samples every 2.5 minutes, and cloud uploads will also occur every 2.5 minutes. The other sensors will continue to take samples every 2.5/5 minutes, and hourly for radon, as described above.

It is not possible to adjust the sampling intervals or cloud uploads when connected to USB.

If you have selected an hourly data frequency, you will see differences between the display of the View Plus and the app/dashboard for the following sensors:

This is because the View Plus display will show the most recent measurements taken every 2.5 or 5 minutes, while the data only updates every hour in the app/dashboard.