If you are experiencing syncing or connectivity issues with your Wave Radon/ Wave Plus or Wave Mini (and do not own a Hub), you can follow these instructions which can solve the issue or help to identify where the problem lies.
Before following the troubleshooting guide below: Is your device secondhand or approx. 1 year old? You may need to change the batteries, especially when performing a Firmware update. We always recommend using a good brand of alkaline (non-rechargeable) batteries when doing a replacement.
Try to sync after each step. By syncing, we mean try to initiate syncing with your Airthings device with the app, by selecting the device and refreshing, or prompting the "sync now" option. If at any point during this troubleshooting the device seems to operate properly, stop! Then tell us after which step it started working.
Here it goes:
Ensure your app is up to date (Check the App or Play store)
Ensure your Bluetooth is enabled
Be within Bluetooth range of the device
Turn off your Bluetooth, and turn it on again.
Turning off/on the Bluetooth MUST be done through Settings (not the pull-down menu). Go to Settings ➡ Bluetooth ➡ On/Off toggle.
Ensure you have internet access (on your phone/tablet).
Ensure your GPS/location is on (required for Android users)
Try placing your phone on Airplane mode for several seconds, then take it off and try to sync again.
Restart your app.
Log out and log in to your app again.
Restart your phone.
Delete your app and reinstall the app again from the iTunes/ Play Store
Note: the following steps may cause data loss if you have been unable to sync at all with the previous steps. Removing the batteries will cause data loss of the data that has not been synced. Please contact our Support team if you have concerns.
Take out the batteries of the device and wait 30 minutes. After 30 minutes, reinsert the batteries. Now, you will have to wait for 1 hour before new measurements become visible again.
Warning! Unpairing from your monitor and pairing again will cause a new measurement segment to start. Do not use this as a troubleshooting step unless you are happy to start a new measurement segment and the other troubleshooting steps are exhausted.
If you encounter an issue with one of our products, or you simply have a question or feedback, let us know: we are happy to help! Contact us using any of the options below:
Start chatting with us in the app (open the menu -> click "Support" -> select "Chat with us")
Click the chat icon in the bottom right hand corner of this page to start chatting with our support team :)
Or email us at email@example.com
Did this answer your