Place the sensor

  • Where you would like to measure the air quality! The device itself is recommended to cover (but not limited to) less than 50 square meters.

  • Within the range of the Hub. SmartLink protocol can easily penetrate 3 thick concrete walls/floors or 10 drywalls in an office building. Old industrial constructions or deep underground areas may be challenging and should be evaluated first.

  • At a height of 1.1 - 1.80m (Breathing Zone)

  • With a screw for permanent installations or the included 3M adhesive for temporary installations.

Avoid placement in proximity to

  • Large metal objects/cabinets

  • Doors or Windows

  • Fresh air supply

  • Sources of heat (i,e radiators) or humidity (i.e. Showers)

  • Outer Walls

The devices should never be mounted on the ceiling. Ensure that the device cannot fall onto someone or something and cause damage. Products should not be mounted above 2m. Exception is Space CO2 mini, which If absolutely needed, can also be placed > 6 ft (1.8m) above the floor, but in this case, the device must be screwed into the wall.

This indicator should make it easier for you to find an optimum placement.

Did this answer your question?